Built in 2011 in the Spanish town of Motril, between the gardens of the Explanadas and the Park Pueblos de las Américas, the structure bridges the difference in height between these two areas and frees the passage of the Avenue Virgen de la Cabeza. The structures used are organic hexagons which allow easy adaptation to the surrounding environment, from host in its structure existing trees and adapt on the slopes to facilitate pedestrian traffic, allowing the movement of persons with motor disabilities.
The support of these structures is based on the lower bound for the Avenue, to emerge as ways to strengthen the gateway tree and at its upper bound. The conditions that have been taken into account are derived from the road shot, whichever save a minimum height of 5m gauge across the width of the Avenue. The structure was built with steel of varying thickness, so that the cutting and folding of the thin surface to create a continuous structural element gap. The clearances of the structure have been closed on its upper face by opaque surfaces that allow pedestrian traffic. In its lower face seals are sandwiched glazed incorporating LEDs, which allow both an illumination of the structure and the Avenue. The manufacturing process of the structures, continues with advanced manufacturing systems in which the architect must produce all the cutting of their projects through the programs of parametric design and scripting.
The support of these structures is based on the lower bound for the Avenue, to emerge as ways to strengthen the gateway tree and at its upper bound. The conditions that have been taken into account are derived from the road shot, whichever save a minimum height of 5m gauge across the width of the Avenue. The structure was built with steel of varying thickness, so that the cutting and folding of the thin surface to create a continuous structural element gap. The clearances of the structure have been closed on its upper face by opaque surfaces that allow pedestrian traffic. In its lower face seals are sandwiched glazed incorporating LEDs, which allow both an illumination of the structure and the Avenue. The manufacturing process of the structures, continues with advanced manufacturing systems in which the architect must produce all the cutting of their projects through the programs of parametric design and scripting.
Δεν υπάρχουν σχόλια:
Δημοσίευση σχολίου